CEM IV/B (P) 32,5 R-SR SULFATE RESISTANT POZOLANIC CEMENT

PRODUCT OVERVIEW

Between 36-55% to Portland cement clinker; It is a hydraulic binder obtained by grinding together additives such as pozzolan, fly ash, blast furnace slag, silica fume, limestone, cooked shale and some set regulating gypsum (CaSO4.2H2O).
High resistance against sulfate and acid attacks, high performance against sulfated, chlorinated, carbonated, thermal waters and sea waters.
It performs very well against the expansion that may occur in the concrete due to the alkali silica reaction.
Its composition: [% 50 Portland Cement Clinker + % 40 Natural Pozzolana (Trass) + % 5 Limestone] + % 5 Gypsum

CERTIFICATE OF PERFORMANCE CONSTANCY NO

1784-CPR-0646

CHEMICAL PROPERTIES

Sulphate (SO₃)	≤ % 3,5
Chloride (Cl^-)	≤ % 0,1
Density	~2,85 g / cm³

PHYSICAL PROPERTIES

Initial Setting Time	≥ 75 minute
Expansion	≤ % 10 mm
2 Day Strength	≥ 10,0 MPa
28 Day Strength	≥ 32,5 N/mm² ≤ 52,5 N/mm²
Specific Surface (Blaine)	4900 – 5500 cm²/g

GENERAL USE

It is in the category of cements with additives according to TS EN 197-1:2011 standard, it is the cement preferred in standard quality concretes and structures. It is especially preferred in applications such as plaster, mortar, screed applications, construction and repair operations, and concrete works in sulfate-containing environments.
Bims increases the quantity obtained thanks to its low density in plaster-mortar productions, and contributes to the workability in ready-mixed concrete productions. Long-term strength increase continues with natural pozzolan content.
It is supplied to the market as packaged.